1.3
Liabilities
1.3.1.
Manufacturer’s liability
Our products are manufactured in compliance with the
requirements of the various applicable European
Directives. They are therefore delivered with
[
marking
and all relevant documentation.
In the interest of customers, we are continuously
endeavouring to make improvements in product quality.
All the specifications stated in this document are therefore
subject to change without notice.
Our liability as the manufacturer may not be invoked in the
following cases:
4
Failure to abide by the instructions on using the
appliance.
4
Faulty or insufficient maintenance of the appliance.
4
Failure to abide by the instructions on installing the
appliance.
1.3.2.
Installer’s liability
The installer is responsible for the installation and
commissioning of the appliance. The installer must
respect the following instructions:
4
Read and follow the instructions given in the manuals
provided with the appliance.
4
Carry out installation in compliance with the prevailing
legislation and standards.
4
Perform the initial start up and carry out any checks
necessary.
4
Explain the installation to the user.
4
If a maintenance is necessary, warn the user of the
obligation to check the appliance and maintain it in
good working order.
4
Give all the instruction manuals to the user.
1. Safety instructions and recommendations
CALORA TOWER GAS 15S EX CALORA TOWER GAS 25S EX
CALORA TOWER GAS 35S EX
8
22/04/2016 - 300026141-001-07
