Step 1
Frame Assembly
Place the frame sections on the floor as
shown.
To form a rectangle, insert frame into the
metal angle joint bracket. Screw the
respective 2 holes with the screws provided.
Front View
Should the screen install in cold weather (Temperature below 18 degrees), please warm up the screen
by opening it and leave it with the room heater for an hour to allow fabric to expand.
This measure is to prevent the fabrics from tearing.
Warning
Back-view of the frame
Step 2
Default setting of the buttons are located at the outer
track. Outer track is ideal for room temperature above
25 Celsius.
Due to cold countries or low temperature room
(below 25 Celsius) may cause fabrics to contract
thus Inner track has to be used. In that case simply
shift snap button to the inner track as shown.
Place 1 moveable button and screw it in
place on the provided hole in one of the
desire track.
Back-view of the frame
Installation Guide
(FIX SERIES)
C
COPYRIGHTS 1998 REMACO TECHNOLOGIES PTE LTD
Website: www.remacotech.com
FIX
V: 9.0
Back-view of the frame
Inner track
Outer track
Snap Button
