background image

WARNUNG!

Um Feuer oder einen elektrischen 
Schock zu vermeiden, setzen Sie 
dieses Gerät nicht Wasser oder 
Flüssigkeiten aus! Öffnen Sie 
niemals das Gehäuse!

WARNING!

To prevent fire or avoid an electric 
shock do not expose the device 
to water or fluids! Never open the 
housing!

ATTENTION!

Afin d'éviter un incendie ou une 
décharge électrique, veillez à tenir 
cet appareil à l'écart des liquides et 
de l'humidité ! N´ouvrez jamais le
boîtier !

BEdIENUNGsANlEITUNG

ACHTUNG!

Lesen Sie sich vor der ersten Inbetriebnahme zur 
eigenen Sicherheit diese Bedienungsanleitung 
sorgfältig durch! Alle Personen, die mit der 
Aufstellung, Inbetriebnahme, Bedienung, Wartung 
und Instandhaltung dieses Gerätes zu tun haben, 
müssen entsprechend qualifiziert sein und diese 
Betriebsanleitung genau beachten. Dieses Produkt 
erfüllt die Anforderungen der geltenden europäischen 
und nationalen Richtlinien, die Konformität wurde 
nachgewiesen, die entsprechenden Erklärungen und 
Unterlagen sind beim Hersteller hinterlegt.

OpERATION MANUAl

CAUTION!

For your own safety, please read this operation 
manual carefully before initial operation! All persons 
involved in the installation, setting-up, operation, 
maintenance and service of this device must be 
appropriately qualified and observe this operation 
manual in detail. This product complies with the 
requirements of the applicable European and national 
regulations. Conformity has been proven. The 
respective statements and documents are deposited 
at the manufacturer. 

MOdE d'EMplOI

ATTENTION !

Pour votre propre sécurité, veuillez lire attentivement 
ce mode d'emploi avant la première utilisation! 
Toutes les personnes chargées de l'installation, de 
la mise en service, de l'utilisation, de l'entretien et 
la maintenance de cet appareil doivent posséder les 
qualifications nécessaires et respecter les instructions 
de ce mode d'emploi. Ce produit est conforme aux 
directives européennes et nationales, la conformité a 
été certifiée et les déclarations et
documents sont en possession du fabricant. 

AmPIRE 

d2100

pROfEssIONEllE pA ENdsTUfE
pROfEssIONAl pA pOWER AMplIfIER
AMplIfIcATEUR fINAl pA pROfEssIONNEl

www.reloopdj.com

Für weiteren Gebrauch aufbewahren!

Keep information for further reference!

Gardez ces instructions pour des utilisations ultérieurs !

Ampire_D2100_IM.indd   1

20.04.2011   13:18:20

Summary of Contents for AMPIRE D2100









Reviews: