Used to
or disable auxiliary functions. Press each key to enable its
corresponding function.
Used to enter, store, or send DTMF codes.
BUTTON
Used to switch between transmit and receive mode.
BUTTON,
Used to turn
or ‘off the LCD backliiht. Press the
button, the backlight will
for about 5 seconds and then automatically turn off. During illuminating and
pressing any key, except the [LAMP] button, the timer will
To turn “off the
backliiht, press the [LAMP] button again.
BUTTON
Used to monitor the selected channels.
SPEAKER-MICROPHONE JACK
Used to connect with external the speaker-microphone, programming cable, or
cable.
CUP
LATCH
1.7 LCD kons
Displays the selected channel number, channel frequency, channel
squelch level or DTMF
When selective call is enabled, messages received are also displayed here.
Channel Number- Displays channel number. Factory default
Frequency- Displays
channel frequency.
Channel
Displays characters of the channel label. Up to 16 alphanumeric characters can
be programmed. Any label over 8
scroll across the
Appears when “low’ power is selected.
when the selected channel is busy.
RELM
Page 3
