1 GENERAL INFORMATION
1
This manual contains information about field programming through the keypad of the RELM
Wireless
series handheld VHF and UHF radiis. This manual is intended for use by
experienced
familiar with similar types of
grade communications
equipment. It contains service
and data for the equipment.
The following precautions are recommended for personal safety:
l
DO NOT transmit until all RF connectors
are
secure
and
properly terminated.
l
SHUT OFF and DO NOT operate this equipment near
blasting caps or in an
explosive atmosphere.
l
Only qualified technicians should maintain this equipment.
1 . 2
The
series
are
VHF or UHF FM Radiis covering the
frequency range of
to
for VHF
and
to
for UHF. The radios
multi-channel
and
digitally synthesized using
a single
for frequency control. The
incorporate an EEPROM for the
of channel frequency, CTCSS
Tone, DCS Code, Two-Tone, and Dual Tone Multiple Frequency/Automatic Numeric Identifier
encode
The
also include low-battery and
Soft key switches can be programmed to control channel scan,
store
and
send,
talk-around, and hi transmit power,
display modes, adding and
deleting
channels
from the scan list, key lock, and more. Status and channel information is
displayed over an
crystal display (LCD). Connectors am provided on the
side of the unit for an external antenna, microphone, speaker, and other optional accessories.
A
of optional accessories are available for the RP hand held radii. Contact your
RELM Wireless dealer for complete information.
1.4
This equipment must be licensed by the Federal Communications Commission (FCC) before it
may be used. Your RELM Wireless dealer can assist you in filing the appropriate
for the FCC,
and
will program each radio with your
authorized
frequencies and signaling
codes.
1
If you need technical assistance, contact a RELM Communications
technician:
Corporation
7100 Technology
FL
Phone: (800) 422-8281
(321)
Communications
