2.4
CALL
ALERT/
TRANSPOND
Disabled
Call
TRANSPOND (Call
Alert).
TRANSPOND (ID
TRANSPOND
(Transpond Code)
Settings
CAT OFF
CAT RING
CAT BEEP
CAT CALT
CAT
CAT TRCD
Disabled
The radio flashes the LED indicator and
rings when it decodes a two-tone or
DTMF signal.
The radio flashes the LED indicator and
beeps when it decodes a two-tone or
DTMF signal.
The radio flashes the LED indicator and
rings when it decodes a two-tone or
DTMF signal; and it transmits the
back to the sending radio.
The radio
the LED indicator
when it decodes a two-tone or DTMF
signal. If DTMF is used, the receiving
radio also transmits the DTMF ID code
(listed in the Channel programming)
back to the sending radio.
The radio flashes the LED indicator
when It decodes a two-tone or DTMF
signal. If DTMF is used, the receiving
radio also transmits the DTMF ID code
(listed In the DTMF Auto ID that is
stored in location 0) back to the
sending radio. If no DTMF Auto ID is
stored in location 0, the receiving radio
will not transpond.
If any of the functions in Table 2.3 and Table 2.4
set to “Off”, the related setting shown in
2.5
can be set, but
setting will not be recognized.
Page 14
RELM Communications
