DTMF
SIGNAL
O - 9
A - D
A - D
O F F
Is 15s
steps)
DKEYA 1
DKEYA 16
DTMF OFF
DTMF
DTMF SEL
0
9
IMC A
IMC D
IMC E
GRPC A
GRPC D
GRPC E
GRPC F
40 OFF
S A R T 1
SART 10
SART 15
When transmitting, the radio transmits
an w-modulated signal for the
programmed time when [DIAL] and the
D key is pressed.
Disabled
When the
DTMF code is
received on a channel, the radio will
ring for approximately 10 seconds and
receiver audio will open. The ringing
can be terminated by the user
responding with a transmission or by
pressing the
button.
Conditions: 1. The receiving
must
have a three digit DTMF ID Code
programmed. 2. The transmitting radio
must be programmed with a
DTMF ID code, a ldigit Intermediate
Code, and a I-5 digit Message code.
(i.e. 123 4567). The whole
message string is sent when the [DIAL]
key is pressed.
The digit that separates the 3 digit
DTMF
code to be decode and the 1
to 5 digit message
123 4567)
Disabled
that a DTMF Select call is for
a group, not for an individual.
Disabled
After a DTMF signal is decoded, it is
the period of time before the squelch is
reset to the ready state of decoding
another DTMF signal.
When changing and storing a
SIGNALING” option, the ID CODE setting in channel mode will be
met to
and the
settings will be reset to
RELM
Page 13
J
