DIAL ID
CONNECT
DTMF HOLD
TIME
STORE 8
SEND
When
the programmed
. . . . . . .
:
Connect or Disconnect DTMF
will
. .
,
,
not be sent when [DIAL] and the
.
or
key is pressed.
Connect
When transmitting, the programmed
Connect DTMF
will be sent when
[DIAL] and
key is pressed.
Disconnect
END
When transmitting, the programmed
Disconnect DTMF
will be sent
when [DIAL] and
key is pressed.
When transmitting, the programmed
Both
BOTH
Connect or Disconnect DTMF
will
be sent when [DIAL] and
or
key is pressed.
Disabled
O N
ON
When transmitting, a stored DTMF
code will be sent when [DIAL] and a
memory location key is pushed. An
number must be programmed in
the user mode. Up to 10 memory
locations can be used (keys 0 through
and
key is pressed. Note: Only the
last five digits of the
number will be
and
key is pressed. Note: Oniy the-
last five digits of the
number will be
D)
C, D,
l
and
Disable
DHT OFF
No Hold Time
2 seconds after
the last number on the DTMF key is
manually selected, but only if the PTT
button is released after the last
number.
Does not allow Auto ID numbers to be
is momentarily displayed when entering this setting.
END” is momentarily displayed when entering this setting.
Page 12
RELM Communications
