Printed in the Federal Republic of Germany
TR-Electronic GmbH 2018, All Rights Reserved
06/21/2018
TR - ELA - BA - DGB - 0028 - 00
Page 75 of 84
7.3.1 Operation with one magnet
Procedure:
● Position magnet to Position A
● Write value 0x545374FF to object 2004h
(0xFF: teach-in all transitions, 0x545374: activate Teach-in-function)
● Position magnet in one process from A to Position B
to confirm each successfully teached transition; an offset value
0 can be
read out at "Object 6020h: Position values"
Teach-in-process finished
● After a successful teach-in process, the actual position value is displayed.
● Alternatively in the intermediate ranges the magnet can be removed and can be
put on again before the transitions are beginning.
Figure 12: Teach-in process, one-magnet-operation
