background image

1

RELACART MIXX16 Digital Mixer Manual

Product Introduction:

·

MIXX16 is a digital mixer through a tablet computer application control, using Wi-Fi to connect, you

can mix in real time on the tablet devices from anywhere within the scope of wireless network.

·

Featured 16 channels of studio-quality Onyx microphone preamps, 2 main output, 6 auxiliary

output.

·

Adopt high performance 40 bit floating-point digital signal processor, 24 bit AD/DA converter.

·

Ultra low-noise, high-headroom design.

·

Multi-touch control, flash visual feedback, and can be intuitive to see the complete frequency

response curve.

·

Input channel built-in 4 -band PEQ, high-pass filter, compressor, gate.

·

The main output and auxiliary channel with 31 bands of built-in graphic equalizer, limiter.

·

Shared global reverb and delay effects.

·

Tuning process can be stored, the stored sound effect could be recalled in the corresponding

occasions, no need to reset the parameters.

·

Each channel can edit their own names and icons for easy identification, no need to use label

sticker.

·

Digital signal processing, reducing signal noise accumulated during transmission, to achieve

high-quality signal transmission over long distances.

·

Built-in WI-FI module, no external router, use the tablet device can search Wi-Fi signal directly.

·

It support up to 10 devices to synchronized Wi-Fi control, allowing multiple engineers to

simultaneously control consoles.

MIXX16 digital mixer front panel (Pic 1)

1. PHONES: Stereo earphone monitor output socket and monitor volume control knob.
2. GAIN: 16 input signal gain control knob, maximum gain 60dB.

3. PEAK: Peak indicator: When the audio signal input is normal will light green; when the audio

signal input is overload will light red.

MIXX16 Digital mixer rear panel (Pic 2)

1.DC power input socket: rated voltage 12V/rate power 48W.

2.Power supply switch: I/O ship type switch, switch to I to connect the power supply, switch to O to shut off

the power.

3.LR Balanced output: mixer main output, connected to the main sound system.

4.Input Channel: 12 XLR type balanced input port +4 XLR compatible with 6.3 sockets input, all channels can

Summary of Contents for MIXX16















Reviews: