53
1.
Removing the rotor scraper.
2.
Unscrew the rotor tines individually.
3.
Insert new tines. Ensure that the sockets are installed correctly according to the
drawing.
4.
Mount the rotor scraper.
9.4.
Replacing wear discs
Wear discs should be checked daily for wear. Perform the replacement as soon as a war disc
is worn down. This will avoid damage to the basic disc.
Damage to the basic disc.
Not only is the wear disc to be replaced but also the basic disc. High follow-up costs.
Check the wear condition of the wear discs daily.
9.5.
Repair of the conveyor belt
The conveyor belt is very rugged in design due to the belt reinforcement on the left and
right. If the conveyor belt is nevertheless damaged by foreign objects, the following remedy
can be applied:
Cracks, slits:
