Reiner jetStamp graphic 970, Operating Manua

Page: 64 / 94

PCset graphic Help 970 64
ERNST REINER GmbH & Co. KG
5.6.3.1.1 Settings
Function Description
Step Indicates the interval at which the numbering machine counts on
(e.g. 1,4,7... in steps of 3).
Repetitions Indicates the number of repetitions of a print image. If, e.g., the
value 3 is set, the numbering machine remains on the same
number for three imprints before it counts on.
The repeat factor can be set from 0 to 99.
The numbering machine switches on at the value 0.
Counting direction backwards The numbering machine can count forwards (e.g. 10,11,12,...) or
backwards (e.g. 10,9,8...).
Pre Zeros Leading zeros can be suppressed or printed (e.g. 5 or 0000005).
The number of printed figures depends on the maximums value set
at "number circle".
5.6.3.1.2 Number circle
The number circle defines the value range in which a numbering machine counter.
When the maximum or minimum value is reached (for upwards or downwards
counting numbering machine), the count is continued at the respective other end of the scale.
Function Description
Minimum This value marks the lower limit of the number circle.
Maximum This value marks the upper limit of the number circle.
Numbering machine status The current counter reading can be set within the defined value
range.
5.6.3.1.3 Font
Selection option between "Font 1" and "Font 2".
"Font 1" and "Font 2" are configurable in the menu bar by clicking the tab
"File – Device settings - Font" or configurable in the toolbar via the button
(see " Font ").