Reiner jetStamp 990, Operating Manual

Page: 45 / 56

Maintenance 45
ERNST REINER GmbH & Co. KG
Originalanleitung
6.2 Cleaning the contacts of the print cartridge
Cleaning the contacts of the print cartridge Fig. + +
In rare cases, impurities on the contacts of the print cartridge can cause incorrect printing
results.
Take the jetStamp 990 from the basis station .
Push [MENU] and browse
t u
until the display shows "Cartridge change start".
Push [SELECT].
Print carriage moves to the device centre.
Push the locking bracket into the rear-most position.
Remove the print cartridge from the device.
Clean the contacts of the print cartridge at the print cartridge and at the print carriage
with a soft cloth slightly soaked in ethanol (spirit) if necessary.
Hold the print cartridge by the grip strip and insert it into the print carriage.
Pull the locking bracket forward again.
Push [SELECT].
The print carriage moves to its basic position.