The PCset graphic software application
35
© ERNST REINER GmbH & Co. KG
Originalanleitung
5.3.4.1.3 Forgotten passw ord
When resetting the password, the
jetStamp
1025 is reset to the factory setting. All saved print
images are deleted.
The password can only be reset when the
jetStamp
1025 has no device error.
If the set password has been forgotten, it can be reset as follows:
Simultaneously press the two middle menu buttons (refer to chapter 1.2 (D)) and the trigger
button
for approx. 10 seconds.
When the password is reset, a warning signal is emitted.
5.3.4.2
Unlock device
Print images can be transmitted and printed
without
entering a password.
To
unlock
the device, select the "Extras" tab in the menu bar
and click "Device safety
Unlock device" or click the button
.
Enter password and click "Unlock".
In the status indicator
and in the toolbar
the symbol changes from
to
.
5.3.4.3
Lock device
Print images
cannot
be transmitted and printed without entering a password.
To
lock
the device again, select the "Extras" tab in the menu bar
and click "Device safety
Lock device".
- OR -
Click on the button
.
- OR -
Switch the device off and on
