Reiner jetStamp 1025 Operating Manual Download Page 25

Page: 25 / 83

Prepare and Commission

© ERNST REINER GmbH & Co. KG

Originalanleitung

4.7

Firmware update

The latest firmware for the

jetStamp 1025

can be downloaded from the REINER website,

www.reiner.de, in the

downloads

section.

Ensure that the PCset graphic is installed on your PC but

not

opened before the firmware

update is started. While the firmware update is being installed, the

jetStamp

1025 must not be

switched off or removed from the supply voltage.

Connect the mains socket

to the supply voltage via the power supply unit.

Connect the micro USB socket

to the PC via the USB cable.

To turn on the device, press the ON/OFF button

The operating status LED

lights up green.

Unpack "Firmware update"

and start

"jetStamp1025_Firmware_0100.exe"

. The firmware is

installed automatically. After a successful firmware update, the PCset graphic can be opened
again.

Summary of Contents for jetStamp 1025




















































































Search results

Summary of Contents for jetStamp 1025

Reviews:

Brands by name

Popular brands

Reiner jetStamp 1025, Operating Manual

Search results

Summary of Contents for jetStamp 1025

Reviews:

Brands by name

Popular brands