13
6)
Headphone/loudspeaker jack
For connecting audio output devices (e.g. speakers, headphones) or a headset
with microphone
Illumination of the reading templates
Illumination for better image quality and increasing accuracy of the text recognition is
integrated in the stand located directly under the display. On the left side of the illu-
mination there is a small switch which can be set in three different positions:
ON:
Move the switch to the rear to turn illumination permanently ON.
OFF:
Move the switch to the middle position to turn illumination permanently OFF.
Auto:
Move the switch to the front to activate automatic lighting. In that mode, illu-
mination remains ON permanently as long as movement can be recognized. With
no movement for approx. 25 sec. light turns into energy saving mode and turns OFF
automatically. Once movement is being detected again, light turns ON automatically.
Note:
we recommend to set the light to ON position, as motion sensor may be influ-
enced by alternating external light influences.
To charge the battery of the illumination
Use the supplied USB charging cable to charge the illumination. To do so, connect
the Micro-USB plug of the charging cable with the Micro-USB port on the left side of
the illumination and the USB type C plug with the USB type C port on the side of the
display. The unit must be switched ON to charge the battery.
ON
OFF
Auto
Micro-USB port
Summary of Contents for topolino tablet
Page 2: ...2 ...
