8
Precautions by alteration of the performance of the system
Stop using the reading device if technical features or performances should change.
Switch the device OFF and disconnect the power supply from the mains wall socket.
Refer directly to your authorized dealer or to Reinecker Vision GmbH Service Center.
Do not use the system again in this condition.
Reinstatement/installation and maintenance
This device may be technically maintained and reconditioned by Reinecker Vision
GmbH only or by an authorized technician. Reinstatement may only take place after
the system has been cleaned and safety checked.
Cleaning of the system
●
mezzo EDU has to be disconnected from the power supply before cleaning.
●
Clean the system with a slightly damp cloth and a mild household detergent.
●
Interior of device must NOT come in contact with liquids.
Special advice for transport and storage
For reasons of safety, the unit must only be transported and stored in the original
packing. The unit must be stored in dry and closed rooms in the original packing.
The following conditions for transport and storage have to be respected:
●
Air pressure 700 - 1000 hPa
●
Temperature range +5°C to + 50°C
●
Relative air humidity 30% to 80%
Disposal of the unit according to EU directive 2002/96/EEC
The device contains of electronic components. To avoid damage to the environment,
the country-specific rules have to be respected.
Power supply
Only use the original power supply and cables which are included in the delivery
by Reinecker Vision GmbH.
Caution:
The use of any other equipment might lead to an increased electromagnetic
emission and to a product damage.
