14
Connection of the unit
Connect the power supply to a mains wall socket and plug the adapter end of the
cable into the AC input socket (12V DC) located on the base plate of the mezzo EDU.
Note:
The supplied plug-in power supply is exclusively for the operation of this device.
Please do not use any other power adaptor or cable. Once the device is plugged in,
it is ready to use.
Description of the control elements
Power switch ON/OFF
Only after connecting mezzo successfully to the power supply, the device
can be switched ON or OFF using the toggle switch. After switching ON,
the green power LED above the toggle switch lights up.
When the device will be turned OFF, the latest used settings are saved
automatically.
When switching ON again, the latest used settings are recalled.
Attentions!:
If the base plate is not lit up after switching ON the device, please check,
if the LED-light is ON (please see next paragraph).
Light adjustment (50% / OFF / 100%)
Press the toggle switch to adjust the LED lighting accordingly:
I
=
LED-light min. 50%
0
=
LED-light OFF
II
=
LED-light max. 100%
General note on using the LED-light
While using the device, it could be helpful to switch OFF or reduce the LED-light
of the device, for example, when the light in the room or from outside changes
(sunlight).
Mains wall socket
0I
I
I
ON
OFF
AC input
Adapter cable
ON
OFF
