59
Dependent upon the control system
configuration it is possible to override all the
automatic functions of the control system
with a single function.
This action can be used for holiday periods
(e.g. to set the whole system into a frost
protection mode), or to temporarily override
all the temperature control of the system.
Below are set out two options.
Option 1
CT2 Programmable Room Sensor set to Channel 0 can be used for
REHAU CT2 clock sensors controlling a group of slave sensors but
do not control actuators. The position of these sensors should be
somewhere central or convenient within the building
Setting this sensor to Channel 0 will control the time and
temperature for the connected group of sensors but the REHAU CT2
clock sensor itself will not control an output.
SPEcIAl FUnctIonS
HolIdAY ovERRIdE FUnctIon
12.0
12.3
Option 2
Permanent Override
If the system if fitted with REHAU CT2 Programmable Room
Sensor the scheduled 4-event program can be overridden (refer to
permanent override on page 47).
