Rehabed Leo Med Instructions For Use Manual Download Page 48 | Manualshive

Page: 48 / 56

Rehabed Leo Med Instructions For Use Manual Download Page 48

48

16.1.

M

ATTRESS AND SIDE RAILS

Leo MED bed has been tested and approved with listed below mattresses. The
mattresses listed below are mattresses recommended by the manufacturer. Contact
your distributor, importer or manufacturer to select a mattress suitable for your bed.

Mattresses have been tested and approved with side rails characterized by specific
dimensions dedicated to the Leo bed (see section 15.3).

Dimensions [mm]

width x length x thickness

Density
[kg/m

3

]

Foam Mattresses

Hyper Foam Plus

800x2000x140; 850x2000x140; 900x2000x140

35/38*

Hyper Foam 2

800x2000x150; 900x2000x150

35/45/50*

Hyper Foam Maxx 250

900x2000x140

35/50/50*

Hyper Air Hybrid

900x2000x160

35/50+50/38*

Memocare

900x2000x140

33/35/50*

EVAQ-PRO

900x2000x140; 900x2000x150

35/38*

Waffle Mattress

780x2000x120; 850x2000x120; 900x2000x120;
900x2000x150

25

Waffle Mattress

850x2000x140

35

Waffle Mattress with HR
filling

780x2000x120; 850x2000x120; 900x2000x120;
900x2000x150

35

Foam Mattress

780x2000x120; 800x2000x120; 850x2000x120;
900x2000x100; 900x2000x120; 900x2000x150;
900x2000x200

25

Foam Mattress

900x2000x120; 900x2000x150

35

Foam Mattress with HR
filling

900x2000x150

35

Mattress extension

780x200x120; 900x200x120; 900x200x140;
900x200x150

25

* The values refer to the density of individual layers of mattress.

Other mattresses available upon request

–

contact your seller or the manufacturer to

check for compatibility and suitability purposes.

▪

Mattresses and side rails not approved by the manufacturer
pose a risk of entrapment for the bed user.

▪

The manufacturer deems the listed above foam mattresses to
be suitable for use with the Leo side rail, however a p

atient risk

assessment must be performed to ensure the gap between the
top of the mattress and top of the side rail when fully lowered
is acceptable and will not introduce a hazard to the patient
when entering/exiting the bed.

▪

If the dynamic mattresses are used without side rail height
extensions a patient risk assessment must be performed to

«
...
46
47
48
49
50
...
»

Summary of Contents for Leo Med

























































Reviews:

No comments