REGO Thermal Printer Technical Manual
www.regotek.com
50
time as ASCII code.
Chinese character mode is selected when the power is turned on.
[Reference]
FS &, FS C
FS 2 c1 c2 d1...dk Define user-defined Chinese characters
[Name]
Define user-defined Chinese characters
[Format]
ASCII
FS
2
c1 c2 d1...dk
Hex
1C
32
c1 c2 d1...dk
Decimal
28
50
c1 c2 d1...dk
[Range]
c1 and c2 indicate character codes for the defined characters.
c1 = FEH
A1H ≤ c2 ≤ FEH
0 ≤ d ≤ 255
k = 72
[Description]
Define user-defined Chinese characters for the character codes specified by c1 and c2.
[Notes]
c1 and c2 indicate character codes for the defined characters. c1 specifies for the first byte, and
c2 for the second byte.
d indicates data. Set a corresponding bit to 1 to print a dot or to 0 to not print a dot.
You can define up to 10 characters.
[Default]
no user-defined characters
Between user-defined characters and data relationship shown below:
