See section
for descriptions of the control behaviour for the controller states, including how the active
heating and cooling setpoints are defined in each controller state.
5.2 Setpoint adjustment
The active setpoint can be raised or lowered by performing a setpoint adjustment. A setpoint adjustment is
performed via the setpoint knob or the buttons on the room unit, or via communication.
A setpoint adjustment shifts both the active heating and cooling setpoints by equal measure. For example, if
a +1 °C setpoint adjustment is applied, both the active heating and cooling setpoint are raised by +1 °C.
Maximum limits (up and down) for the setpoint adjustment can be set via configuration, see the
Configuration -> Room unit
pane in Application tool.
Regio
Ardo
manual, Rev. D
65