EN
INSTRUCTION
ED-T43L-V
IN20031 REV. A, 2020-10-28
C
Caauuttiioonn!! Read and understand the instruction before using the product.
C
Caauuttiioonn!! Ensure that the installation complies with local safety
regulations.
C
Caauuttiioonn!! Before installation or maintenance, the power supply should first
be disconnected. Installation or maintenance of this unit should only be
carried out by qualified personnel. The manufacturer is not responsible
for any eventual damage or injury caused by inadequate skills during instal-
lation, or through removal of or deactivation of any security devices.
Function
ED-T43L-V is a user-friendly touch display suitable for all types of
indoor environments. The users have access to different settings
depending on the assigned access rights.
Technical Data
General data
Supply voltage
24 V DC (22…26 V DC)
Power consumption
1.2 VA
Protection class
IP20
Storage temperature
-20…70 °C
Ambient temperature
0…45 °C
Ambient humidity
5…95 % rH
Dimensions, external (WxHxD)
144 x 96 x 14 mm
Display type
Resistive touch
Touch panel
4.3" TFT-display
Communication data
Communication ports
1
Port type
RS485
Default protocol
Modbus
Supported protocols
Modbus
Communication speed
19200 bps
Parity
N
Stop bits
1
Installation
The display is starting up after connecting the power. Wait a few seconds
for the home screen to be shown.
Log in as described under
Wiring
The display cable is connected to the display port on the Corrigo
controller via a 4P4C modular contact. The cable is ordered separately
and is available in two versions (3 and 10 m). A user made cable can be
made according to the wiring diagram in
. The maximum cable
length is 100 m.
Figure 1 User made cable
Settings
The display reflects the controller configuration. The configuration can
be changed with the free software
Application tool
(see www.
regincontrols.com). Values such as setpoints, time channels, times etc
are changed via the display as described under
Handling
Getting started
1. Press
2. Log in with
3. Go to
Account settings
and use the navigation buttons to go to page 3
4. Select the functions that should be shown in the display
5. If a different language is required, navigate to page 2 and change it
under
Language
Log in access code
The display uses the same access code that is used in the controller.
Navigation
Navigation is done using four main menu buttons.
Menu button
Description
This is the home screen. Here the user gets an overview of
the actual values and setpoints.
In this menu fan settings are made:
– Boost fan
– Extended run
– Stop
Time channels can be set and modified in this menu (if they
are configured in the controller).
Different settings can be viewed or modified under this menu,
e.g.:
– Account settings, such as language settings and pin codes
– Home screen content
– Setpoints
– Date and time
– Status
– Configurations related to CLOUDigo, TCP/IP and address
G0
+C
B
A
1
2
3
4
ED-T43L-V
4P4C contact
ED-T43L-V
1