1
2
www.regentlight.co.za
www.regentlight.co.za
INSTALLATION INSTRUCTIONS
ALL CONNECTIONS TO BE CARRIED OUT BY A QUALIFIED ELECTRICIAN
ALL CONNECTIONS TO BE CARRIED OUT BY A QUALIFIED ELECTRICIAN
1
PLEASE READ CAREFULLY BEFORE STARTING INSTALLATION.
PLEASE READ CAREFULLY BEFORE STARTING INSTALLATION.
Miso - Interior & Exterior
WARNING
Electronic Control Device
Electronic Control Device
WARNING
3 - 13 MAIN REEF SERVICE ROAD, CORNER
SPRINGBOK AND MAIN REEF ROAD, INDUSTRIA,
JOHANNESBURG. SOUTH AFRICA.
TEL : +27 11 474 0171
www.regentlight.co.za
REGENT LIGHTING A DIVISION
OF WAHL INDUSTRIES.
Save These Instructions for Future Reference
ELECTRIC SHOCK
HAZARD
This equipment is to be
serviced by trained
personnel only.
ELECTRIC SHOCK
HAZARD
This equipment is to be
serviced by trained
personnel only.
Miso
Interior & Exterior
DO NOT CONNECT THE FITTING LIVE
November 2017
Save These Instructions for Future Reference
Regent Lighting reserves the right to change specifications modify designs
and discontinue items without incurring obligation and whilst every effort is
made to ensure that descriptions, specifications and other information in
this catalogue are correct, no warranty is given in respect thereof and the
company shall not be liable for any error therein.
WARNING:
TO AVOID FIRE, SHOCK OR DEATH
TURN OFF POWER
AT CIRCUIT BREAKER OR FUSE AND TEST THAT THE POWER IS
OFF BEFORE WIRING
ALL LUMINAIRES SUPPLIED AND TO BE INSTALLED ABOVE AND BELOW 5 METERS
ARE IN COMPLIANCE WITH SANS 60598 SECTION 3.5.6 ACCORDING TO THE
MANUFACTURER GUARANTEE AND WARRANTY
Electrical products can cause death, injury, or
damage to property. Installation of this
product must be carried out by a qualified
electrician, in compliance with SANS 10142 or
corresponding regulations of the country of
installation. On completion of installation, the
Certificate of Compliance must be updated.
6
6. Switch on power
supply.
FSL
Finished surface level
THE FINISHED SURFACE LEVEL NEEDS TO BE
BE FLUSH WITH THE OPENING OF THE WALL BOX
FSL
65MM
85MM
Requirements:
Be sure the electricity to the
system you are working on is
isolated.
If the main supply power
(live) is on, it will cause
damage to the luminaire.
1. Select the required position for
the luminaire.
Ensure the cut out is level and
square and fits the metal
electrical wall box with an
electrical supply.
THE FSL (Finished surface level)
NEEDS TO BE FLUSH WITH THE
OPENING OF THE METAL WALL
BOX.
NB: There is an installation
tolerance on the fitting.
INSTALLATION
TOLERANCE
FSL
FSL
82mm
65mm
235mm
THE
FINISHED
SURFACE
LEVEL
(PLASTERED/BRICK ETC.)
MUST BE FLUSH WITH THE
OPENING/EDGE OF THE
BOX
This way
up
}
Finished surface level
NB!!! The Light Fitting once
installed into the wall box has a
movement tolerance of 6mm to
secure fitting.
