Any problems or questions call Regency Office Furniture at 1-866-816-9822
IMPORTANT NOTICE:
● Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid scratching the parts.
● Check to be sure that you have all parts and hardware.
● Remove all wrapping materials, including staples & packing straps before you start to assemble.
● Do not tighten all screws/bolts until completely assembled.
● Keep all hardware, parts and packaging out of reach of children.
Organize your parts and
hardware.
Hardware Components should include:
A)
12 Threaded Cams
B)
12 Large Bolts
C)
1 Assembly Key
D)
2 Medium Bolts (Type A)
E)
2 Medium Bolts (Type B)
F)
8 Lag Bolts
G)
16 Small Bolts
Wooden parts include:
H)
2 Side Legs
I)
1 Center Leg
J)
2 Table Top Halves
K)
2 Side Stringers (Type A)
L)
2 Side Stringers (Type B)
M)
1 Center Stringer (Type A)
N)
1 Center Stringer (Type B)
TVCTRC12048 | TVCTRC9648 - INSTRUCTIONS
A
Step 1:
Connect two Table Top Halves
(J) together. Align pins. Close Latch to
hold halves together.
Step 2:
Insert Threaded Cams (A) into
holes. Holes are located on sides of Side
and Center Stringers. Turn so that the
longer line on the Cam is horizontal.
B
C
D
E
F
G
H
I
J
K
L
K
L
M
N
F
B
E
D
G
H
I
J
A
IMPORTANT:
You may want to
position all parts before attaching
with bolts to ensure that assembly
will be completed correctly. All Type
A Stringers should be on the same
side of the table; likewise, the same is
true for Type B Stringers. The Type B
Stringers, when attached should cover
the Bolts used to secure the Type A
Stringers.
