A
B
C
D
E
F G
A. Table Top
B. Rod
C. Cylinder
D. Screws (16)
E. Feet (4)
F. Spider
G. T-base
Rectangle and Corner Training table with T-Base
Step 1:
Screw 4 feet
(E)
into
T-base
leg ends
(G)
.
Step 2:
On the rod
(B)
remove
the nut from the bolt, set the nut
aside.
Step 3:
Insert the rod (B) through the
hole in the T-base
(G)
.
The permanent
nut should be
on the underside
of (G).
STEP 4:
Next place the cylinder
(C)
over the exposed metal rod
STEP 5:
Place the exposed end of
the metal rod
(B)
through the hole in
the spider
(F)
and twist the nut back
onto the rod until tight. Make sure the
front and back arms of the spider are
angled in the same direction as the
T-Base arms.
The product
should now
look like the
example to the
right.
(TTRC4824, TTRC6024, TTRC7224, TTCNR24, MTBT22)
Organize your parts. You will need a phillips head screw driver, pencil and measuring tape, drill(optional).
Two people are required for assembly.
