Any problems or questions call Regency Office Furniture at 1-866-816-9822
IMPORTANT NOTICE:
Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
Check to be sure that you have all parts and hardware.
Remove all wrapping materials, including staples & packing straps before you start to assemble.
Do not tighten all screws/bolts until completely assembled.
Keep all hardware parts out of reach of children.
Organize your parts and hardware. You will need (2) people, a Phillips head screwdriver and a rubber mallet.
Lateral/ Single Shelf Low Credenza • ONCSLFBK6020 • INSTRUCTIONS
CARTONS: TT6020, PLF3020, PSC3020
LS-E
TT-H
PED-L
LS-D
Parts :
PED-M
LS-B
LS-A
LS-G
LS-A:
Back Panel
(28” x 17.25” x 1”)
Quantity: 1
LS-D:
Foot Bracket
(19.75”D)
Quantity: 2
LS-C:
Top Panel
(28” x 16” x 1”)
Quantity: 1
LS-B:
Base Panel
(28” x 19” x 1”)
Quantity: 1
LS-E:
Shelf
(28” x 17.75” x 1”)
Quantity: 1
LS-G:
Right Side
(19.75” x 17” x 1”)
Quantity: 1
LS-F:
Left Side
(19.75” x 17” x 1”)
Quantity: 1
Cam Lock Assembly:
To open Cam, point arrow
toward Cam Pin hole. To
lock Cam, turn clockwise.
Figure 1:
TT-H:
Credenza
Top
(59” x 19.75” x 1”)
Quantity: 1
Parts List continued on back.
LS-F
Lateral/ Single Shelf
Low Credenza
Page 1
