Any problems or questions call Regency Office Furniture at 1-866-816-9822 or email [email protected]
IMPORTANT NOTICE:
•
Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid scratching the parts.
•
Check to be sure that you have all parts and hardware.
•
Remove all wrapping materials, including staples & packing straps before you start to assemble.
•
Keep all hardware parts and packaging out of reach of children.
MTBP27
·
Kee Post Table Legs INSTRUCTIONS
You will need 2 people for this assembly.
You will need a Phillips Head Screw Driver and a Tape Measure to Assemble.
Hardware :
A:
Screws(24)
Parts :
B:
Legs(4)
A
C
B
STEP 1 (Square Table Top):
Place
Table Top(C)
on a clean flat surface with desired table finish face down. Position
assembled legs as shown in Figure A.
Then, attach assembled Legs to Table Top using
6 Screws(A)
per Leg.
C
Figure A
C:
Table Top (may vary)
*
NOTE:
Place Legs at
least 1-inch away from
Edge Table*