IMPORTANT NOTICE:
● Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
● Check to be sure that you have all parts and hardware.
● Remove all wrapping materials, including staples & packing straps before you start to assemble.
● Do not tighten all screws/bolts until completely assembled.
● Keep all hardware parts out of reach of children.
LCTRT12047, VCTRT12047 - INSTRUCTIONS
You will need 2 person(s) for this assembly.
You will need a Phillips Head Screw Driver and a Rubber Mallet to Assemble.
Hardware :
A:
Flat Bracket(2) •
B:
Small Screws(48) •
C:
Cam Pins(10) •
D:
Double Sided Cam Pins(2)
E:
Cam Locks(12) •
F:
Dowel Rods(8) •
G:
Corner Bracket(6)
Parts :
H:
T
op(2) •
I:
Stringer •
J:
Leg(2)
A
B
C
D
E
F
G
STEP 1 :
Lay one top(H) down cam locks(E) facing up and
insert 2 double cam pins(D) into locks(E) and tighten.
STEP 2 :
Lay second table top(H) down and insert opposite
side of double cam pins(D) into locks(E) and tighten.
H
I
J
H
H
H