Any problems or questions call Regency Office Furniture at 1-866-816-9822
IMPORTANT NOTICE:
● Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
● Check to be sure that you have all parts and hardware.
● Remove all wrapping materials, including staples & packing straps before you start to assemble.
● Do not tighten all screws/bolts until completely assembled.
● Keep all hardware parts out of reach of children.
You will need 2 person(s) for this assembly. You will need a Phillips head screw driver.
LADSR7130, LADSL7130 • INSTRUCTIONS
A
B
C
F
D
E
Hardware: A: Grommet(1) • B: Cam Pins(33) • C: Caps(33) • D: Small Screws(24) • E: Flat Brackets (4)
G
H
Parts: F: Desk Modesty • G: Right Desk Leg • H: Left Desk Leg • I: Desk Shelf • J:Desk top
•K: Return Modesty • L: CPU Base • M: Right CPU Leg • N: Left CPU Leg • O: Return Top.
I
J
L
M
N
O
STEP 1 :
Lay Desk Top(J) face down and
insert 6 cam pins (B) .
STEP 2 :
Insert 2 Cam Pins(B) into Desk Modesty(F) then
attach Desk Shelf(I) to Modesty and Lock cams
(see fig 1) .
K
B
B
B
B
B
B
B
B
J
F
F
I
Figure 1:
To open Cam, point
arrow toward Cam Pin hole.
To lock Cam, turn clockwise.
