Kobe T-Base Assembly and Installation
Step 1:
Screw 2 Glides/Casters
(C)
into each T-base
Leg
(B)
.
Organize your parts. You will need a phillips head screw driver, pencil and measuring tape, drill(optional).
Two people are required for assembly.
(MKTRCT4824, MKTRCT6024, MKTRCT7224, MKTRCC4824, MKTRCC6024, MKTRCC7224)
Parts & Hardware:
(Depending on the product, PART C will be 4 Glides OR 4 Casters)
A:
Table Top •
B:
T-base Leg(2) •
C:
Glides/Casters(4) •
D:
Screw(16)
A
B
D
C
B
Step 2:
On a clean flat surface, place desired finish of
Table Top(A)
face down
.
ALIGN THIS CORNER
WITH TABLE TOP
CORNER
9.5”
Step 3:
Prepare your Template (INCLUDED) by taping both
template pages to one another on the dashed line.
EXAMPLE
4”
LINE UP TOP EDGE OF SECOND SHEET HERE.
C
