Regency FIREGENIE FG37-LPG Manual Download Page 32 | Manualshive

Page: 32 / 32

Regency FIREGENIE FG37-LPG Manual Download Page 32

Printed in Canada

© Copyright 2014, FPI Fireplace Products International Ltd. All rights reserved.

Installer: Please complete the following information

Dealer Name & Address: ______________________________________________
___________________________________________________________________
Installer: ___________________________________________________________
Phone #: ___________________________________________________________
Date Installed: ______________________________________________________
Serial No.: __________________________________________________________

Register your Regency

®

warranty online

www.regency-fire.com.au

Reasons to register your product online today!

• View and modify a list of all your registered products.
•

Request automatic email notification of new product updates.

• Stay informed about the current promotions, events, and special

offers on related products.

• Help assure you get the most out of your warranty.
• Eliminate confusion and frustration if warranty** service is required in

the future.

** Proof of purchase required at time of warranty request.

«
...
30
31
32

Summary of Contents for FIREGENIE FG37-LPG

































Reviews:

No comments