48
Regency GF900L-1 Gas Fireplace
maintenance
GLASS DOOR INSTALLATION
2. Pull forward until the lower door latch is disengaged from the door
frame.
3. Push downward until the Lower Door Latch is below the Door
Frame.
4. Release the lower door latch until it reaches its resting point.
5. Remove the door tool and repeat steps 1-5 on the other lower door
latch.
6. Pull the bottom of the door towards you until the door is angled
away from the firebox by about 30
°.
Lift the door up and over the
upper door hooks.
7. To install the glass door - reverse steps.
1. Insert the door tool into the lower door latch.
WARNING
: Do not operate the appliance with the glass panels removed, cracked or
broken. Replacement of the glass panels should be done by a licensed or qualified
service person. Glass should be cool if cleaning is necessary.
Door Tool
Upper Door Hooks
Lower Door Latches
Handling of Ceramic fiber log sets and brick panels
When installing or removing ceramic fiber log sets or ceramic brick
panels (if installed) from an appliance we recommend that you use
latex gloves and a P1 respiratory filter be used.
We also recommend if when servicing the appliance that any items
which may be replaced, not be broken up and are sealed within a
heavy duty polythene bag and labeled as RCF waste.
A vacuum with a HEPA filter should be used when cleaning up re-
maining dust or broken bits.
Protective clothing is not required when handling these articles.
RCF waste is classed as stable, nonhazardous waste which may be
disposed of at any licensed landfill site.
