Regal 32 EXPRESS, Owner'S Manual

Page: 214 / 364

19
Auxiliary Equipment Operation
VACUUM CLEANER SYSTEM-TYPICAL
The vacuum system is located
in the salon at the port forward
berth bulkhead. Included with
the vacuum is a netted bag of
hoses and various vacuum at-
tachments.
SAFETY WARNINGS
1. This is a dry vacuum system. Do not use on wet sur-
faces.
2. Never operate the vacuum without fi lters and bags in
place.
3. Use careful monitoring when children are around. Do
not let the vacuum cleaner be used as a toy.
4. Do not try to repair the vacuum as the unit is sealed.
Return the unit to InterVac or an authorized reparir center
for proper repairs.
5. Use only as described in this manual. Use only factory
attachments and bags.
6. Do not use with any blocked openings. When the sec-
ondary fi lter becomes dirty, rinse in warm water or replace
the fi lter. Filters must be completely dry before using.
7. Never drop or put any object into any opening.
8. Turn off the accessory breaker at the ship’s AC panel
to deactivate the vacuum cleaner.
9. Keep all body parts and clothing away from all moving
parts.
10. Do not pick up anything that is burning or smoking
such as cigarettes, matches, hot ashes or sharp objects. Do
not use without dust bag or fi lters in place.
11. Do not attempt to operate the unit with a wet hose.
12. Do not store objects close to the vacuum unit.
13. Do not pick up fl ammable or combustible liquids such
as gasoline, or use in areas where they might be present
such as the bilge.
14. Do not step on the hose, nozzles or pull hard on the
hose.
OPERATION
1. To operate the vacuum, the
accessory breaker
at the main
ship’s main AC panel must be turned to the “ON” posi-
tion.
2. Lift the inlet cover on the vacuum unit.
3. Insert the hose cuff (one with the metal band) with a
slight twist and the vacuum cleaner should start.
4. To remove, turn hose in either direction while pulling
the hose toward you and the vacuum cleaner will stop.
Exhaust Filter
Door
Inlet Valve/
Cover
Dust Bag
Vacuum Unit
Case/Motor
Note:
If the motor stops the thermal protector on the unit will
reset automatically after about 1/2 hour. This is normal
for the vacuum cleaner.