Rev G
REF TEK 130 Multi-Channel Users Guide
5/14/2021
96223-00-UG
Reftek Systems Inc.
19
Selection of a sample rate
from Group One.
When the user activates any of the
other datastreams, the sample rate
chosen must be the SAME.
Selection of 125 SPS for datastream 1.
This means that when datastream 2 is
activated the sample rate is fixed at 125 SPS
and there are no other sample rate choices
available.
Selection of a sample rate
from Group Two.
When the user activates any of the
other datastreams, ANY of the group
two sample rates can be chosen.
Selection of 50 SPS for datastream 1.
This means that when datastream 2 is
activated the choice is selection of any of
Group two sample rates (200, 100 or 50).
All six channels run at the same base sample rate at this time.
Question: Does the IBM Microdrive™ fit in the 130
-MC Flash assembly?
The IBM Microdrive™ does fit
into the 130-MC but is unusable because the micro-drive is a rotating media
and injects noise into the system that will affect the internal sensor (i.e. Every time the Microdrive
™
spins up,
the rotational torque is transmitted through the case and measured by the sensor). Larger, up to 2 GB,
Compact
Flash™ cards are available and are Solid State media.
Question: Can I format the Compact Flash on a PC?
For optimal performance in a REF TEK 130 recorder, Compact Flash disks should ALLWAYS be formatted BY
THE RECORDER.
Warranty Statement
REF TEK instruments are warranted free from defects of manufacture for one year from date of
shipment.
For the full text covering the Product Limited Warranty, Warranty Remedies, How to Obtain
Warranty Service, Warranty Exclusions and Disclaimer, Limitation of Liability, Official Language,
Registration and any Product Extended Limited Warranty that may apply, please see:
https://reftek.com/terms-conditions
Warranty/Non-Warranty Service
The customer must obtain a Return Material Authorization (RMA) number from REF TEK before
returning any equipment.
Do not return any REF TEK supplied equipment without first
obtaining an RMA number
.
The following policy is applicable for warranty/non-warranty equipment when a problem is
encountered.
