Controller
Vacuum spray degassing — 06.07.2016 - Rev. B
English — 37
9
Controller
9.1
Operator panel
1
Error LED
•
The Error LED illuminates in the event of a fault
7
"Back" to the previous menu
2
Display
8
Auto
•
For continuous operation
3
Auto LED
•
The Auto LED illuminates green in Automatic mode
•
The Auto LED flashes green in Manual mode
•
The Auto LED is not illuminated when the system is
stopped
9
"Forward" to the next menu
4
Stop
•
For commissioning and entry of new values in the
controller
10
Menu
•
Call up the Customer menu
5
OK
•
Confirm actions
11
Quit
•
Acknowledge messages
6
Manual
•
For tests and maintenance tasks
Selecting and changing parameters
1. Use "OK" (5) to select the parameter.
2. Use the "
▼
" (7) or "
▲
" (9) arrow keys to change the parameter.
3. Use "OK" (5) to confirm the parameter.
4. Use the "
▼
" (7) or "
▲
" (9) arrow keys to switch to a different menu option.
5. Use "Quit" (11) to switch to a different menu level.
Summary of Contents for Servitec 30
Page 2: ......
Page 56: ...Annex 56 English Vacuum spray degassing 06 07 2016 Rev B...
Page 57: ......
