Reflex Marine FROG-6 HC6-01 620, User Manual

Page: 9 / 97

User Manual FROG-6
UM-0007-REV.06 Page 9
1 INTRODUCTION
1.1 Scope
This User Manual is for the following six passenger capacity FROG-6 models:
i. HC6-01 (620) – Standard
ii. HC6-01 (621) – Mexico Standard
iii. HC6-01 (622) – Brazil Standard
iv. HC6-01 (640) – Arctic
Note: Throughout this manual the use of this symbol “ “ denotes safety critical
information.
1.2 Introduction
The FROG-6 Personnel Transfer Capsule (PTC) is a personnel transfer device designed to provide
increased passenger protection when carrying out the transfer of personnel between vessels and
installations.
Crane personnel transfers are carried out for a wide variety of reasons including routine, urgent
operational and emergency reasons. The FROG-6 can accommodate a stretcher to transfer injured
personnel in a protected environment.
The FROG-6 comprises the following two main assemblies: firstly, the stainless steel outer
framework containing polyethylene buoyancy panels; secondly, a spring-dampened seating
assembly mounted on a central column. All materials have been selected specifically to minimise
corrosion in the marine environment.
The outer framework protects passengers from impacts and contains the buoyant elements which
ensure the FROG-6 floats and is self-righting in water. At its base are keel weights which assist in
rapid self-righting.
The outer shell lands on three feet that provide shock absorption and ensure that the FROG-6 is
stable on uneven surfaces or when landing on a heaving vessel. The outer shell also has three large
open accesses that allow rapid unimpeded exit.
During transit passengers are seated and secured with full harnesses to protect them against
whiplash and falling. Seating is mounted on a sprung carriage to provide protection against heavy
landings.
The sling assembly is of a special design to prevent rotation.
Note: The regulations governing personnel transfer operations vary greatly from country to country and it is imperative
that operators of the equipment establish the relevant requirements for the area of operation.
Link to Index