Reflex Marine FROG-6 HC6-01 620, User Manual

Page: 45 / 97

User Manual FROG-6
UM-0007-REV.06 Page 45
6.7 Post Load Test Visual Inspection
(NOTE: RML website www.reflexmarine.com/support should be checked for the latest version of the
tables in this section)
Question Response
When should a Post Load
Test Visual Inspection be
conducted? A post load test visual inspection must be conducted immediately
following every load test.
The load test exerts additional stress into the FROG and this
inspection formally records whether any resulting weakness is
observed.
Who should conduct this
inspection?
A Competent Person.
Does this inspection
require a formal record?
Yes.
What drawings are
required to support this
inspection? The drawings are available in Appendix B .
What equipment is
required to perform this
inspection? i. A ladder.
ii. An inspection frame or floor matting.
iii. Good lighting.
A suitable means of safely accessing the top and the bottom parts of
the FROG-6 is required. When using a step ladder or ladder it should
be securely fixed to prevent slippage whilst accessing the top of the
FROG. The FROG-6 can be laid on its side on protective matting, or
the use of a secure inspection frame assembly to safely access the
underside of the FROG-6 is recommended. Do not go underneath an
active lift.
Be aware th
at in some regions “Working at Height” regulations may
apply.
The following checklist is suggested as a suitable list of required inspection items and a suitable
format for recording key inspection data. A
‘ WORD ’ copy of this inspection checklist is included on
the distributed CD’s and is also available on the Reflex Marine Ltd website at
www.reflexmarine.com/support .
Link to Index