Reflex Marine FROG-3, User Manual

Page: 4 / 77

User Manual FROG-3
Rev 19 Page4
included for a range of recommended inspection points.
17 Minor edits
Section 2.1 Model No from HC9-01 to FS-01
Section 5.12.2 vi: Change from remove nut to slacken nut
Corrections
Sections 6.5 & 6.6 and 6.7 –Inspection Check Lists Forms

Point 2 : delete “through the lifting bolt retaining sleeve” – not
relevant to Frog 3

Point 4 : Replace ‘alignment’ with ‘anti-rotation’

Point 5 : Delete word ‘clevis’ – not relevant for Frog 3

Point 6 : Change ‘alignment roll pin on older models’ to ‘keel plate
nut roll pin on older models’ - clarity

Point 6 : Delete ‘tamper proof seal’ not present.
Section 6.10.1 : Kit Listings

Critical Parts Kits for Low Temperature M40 Frogs : Add sling cover.

Restraint Harness Kit Numbers corrected
Include latest drawing FS-GA1 Rev B showing correct text for SWL = 330 Kg
Include latest drawing FS-GA2 Rev B : showing tamper proof seals fitted
Include latest drawing FS-GA3 Rev B : previously omitted showing current
seat arrangement
Include latest drawing F-ASY-11 Rev B ; change of word Ferrule to Thimble
Appendix C : Parts Listing

F -01 – 049 : Buoyancy fitting button head screws : Correct the
material description to 304 Stainless steel

F-01 – 221 : Seat assembly anti rotation bolt : Correct the material
description to 17-4PH 15% chrome alloy steel.
No
No
No
No
No
No
No
No
18 Overview of Major Revisions

Original Instructions added to cover page as per Machinery Directive

Alternative Operating Limit Methodology added

Clarified SWL and Passenger Loading Limitations (330Kgs and 270Kgs
limits)

New EC type examination and ABS PDA cert added

New ‘Ultra High’ Usage Category defined with corresponding
inspection frequencies.

Parts Kits updated and new kit numbers

The parts listings have been removed from the User Manual. Parts
listings will in future be available online (or directly from Reflex Marine)
, where the parts list for the serial number of each Frog can be
matched
Revised Sections

Section 2.1: FROG model numbers updated

Section 5.4.2: References to new drawing and part numbers

Section 5.7 Revised to advise that oversized luggage should be
transferred as a separate lift.

Section 5.12.2: Buoyancy reconfiguration diagram updated to remove
references to old P/Ns
NO safety
critical changes
occur in this
revision. All
changes are
enhancements
to the
documentation
and the advice
regarding Frog
3 operation
and
maintenance.