Page
1
Ascento Group Australia P: 1800 807 604 E:
WaterMark Quality System Doc # RQS.1010
REEFE External Pump System with
RainPro RM4000-3 Rain to Mains Backup Valveset
Installation Guide & Owners Information
MODELS: RM4000-3, RM6000-3, RM7000-3, RC450-3, RC750-3, RM4058
** Please leave this guide in a safe place for the owner **
IMPORTANT INFORMATION
MANDATORY INSTALLATION CONDITION: THE PREMISES WHERE THE PUMP IS INSTALLED
MUST BE PROTECTED BY AN RCD (SAFETY SWITCH)
–
DO NOT INSTALL PUMPS WITHOUT
THIS PROTECTION
•
All parts shown are WaterMarked & certified for Potable Water
•
Fittings may differ from the image shown
•
Do not adjust the PRV, warranty is void if adjusted
•
Flooded suction only, no suction lift unless a float switch is added in the rainwater tank
•
A Y-Strainer or Pre-filter MUST be installed in the suction pipe between the rainwater tank and the pump
–
warranty is void if this is not fitted
•
Read and follow the instructions in the pages following
IMPORTANT: if installing close to a wall or other fixture, use barrel-
union connections to allow removal if ever required.
WMK Licence: WM-022109
Australian Standard: WMTS-477
