How to Associate Reed KumoSensor
Step 1
. Reed KumoSensors are shipped with battery
installed; but to reduce waste, there is no battery
insulation tape to pull out.
The matching magnet is placed in the opposite
orientation and on the
right
side in package.
Step 2
. Rotate the magnet so that the logo are
aligned in the same orientation, place it on the
left
side of the main sensor element.
Step 3
. Move the magnet in contact with the Reed
KumoSensor and then away. A LED light should
start flashing for about 2 minutes. Search and
assocaite during that time.