background image

8

Accessories and Replacement Parts

•  R8888 

Deluxe Hard Carrying Case

Don't see your part listed here? For a complete list of all accessories and 

replacement parts visit your product page on www.reedinstruments.com.

Applications

•  Floor maintenance
•  Surface quality assurance
•  Stone and tile manufacturing
•  Paint and ink manufacturing
•  Automobile paint inspection

Product Care

To keep your instrument in good working order we recommend the following:
•  Store your product in a clean, dry place.
•  Change the battery as needed. 
•  If your instrument isn't being used for a period of one month or longer 

please remove the battery.

•  Clean your product and accessories with biodegradable cleaner. Do not 

spray the cleaner directly on the instrument. Use on external parts only.

Product Warranty

REED Instruments guarantees this instrument to be free of defects in 

material or workmanship for a period of one (1) year from date of shipment. 

During the warranty period, REED Instruments will repair or replace, at no 

charge, products or parts of a product that proves to be defective because 

of improper material or workmanship, under normal use and maintenance. 

REED Instruments total liability is limited to repair or replacement of the 

product. REED Instruments shall not be liable for damages to goods, 

property, or persons due to improper use or through attempts to utilize the 

instrument under conditions which exceed the designed capabilities. In 

order to begin the warranty service process, please contact us by phone at 

1-877-849-2127 or by email at [email protected] to discuss the 

claim and determine the appropriate steps to process the warranty.

www.

.com

[email protected]

1.800.561.8187

Summary of Contents for R7700











Reviews: