PowerLift by ReechCraft
48
Pre-start Inspection
It is the operator’s responsibility to perform a pre-start inspection of the machine prior to
use. Reference Section 2 in this manual for pre-start inspection procedures.
This manual must be read and understood in its entirety prior to performing a pre-start
inspection.
Frequent and Pre-delivery Inspection
The frequent inspection and pre-delivery inspection shall be performed by a competent
person or a qualified mechanic.
The frequent inspection and pre-delivery inspection procedures are performed in the
same way but at different times. The pre-delivery inspection shall be performed prior to
each sale, lease, or rental delivery. The frequent inspection shall be performed on each
machine in service for three months; out of service for more than three months; or when
purchased used. The frequency of this inspection must increase as environment and
frequency of use requires.
Reference the appropriate areas of this manual for service and maintenance procedures.
Annual Machine Inspection
The annual machine inspection must be performed by a competent person or a qualified
mechanic on an annual basis, no later that 13 months from the date of the prior annual
machine inspection.
Reference the service and maintenance sections of this manual and appropriate inspection
form to complete this inspection.
5-year Machine Inspection and Track Replacement
The mast coupling pins, cam locks, track, and climbing unit must be inspected and the
track replaced by an authorized ReechCraft service center when:
•
The track is worn beyond specification (0.2 inches). (See Figure 6.0)
•
The track is damaged, bent, or corroded.
In conjunction with specified inspections, maintenance shall be performed by a competent
person or a qualified mechanic.
S MAINTENANCE
SECTION
6
