PowerLift by ReechCraft
40
Platform Caught Overhead
If the platform becomes jammed or snagged in overhead structures or equipment, rescue
the platform occupant prior to freeing the machine.
ReechCraft, Inc. must be notified immediately of any incident involving a ReechCraft
product. Even if no injury or property damage is evident, the factory should be contacted
by phone and provided with the necessary details.
Contact Information:
Technical Safety and Engineering Department
845 34th St S, Fargo, ND 58102
[email protected]
In USA
: 888-600-6160
Outside USA
: 701-280-5900
Failure to notify the manufacturer of an incident involving a ReechCraft PowerLift product
within 48 hours of such an occurrence may void any warranty consideration on that
particular machine.
FOLLOWING ANY ACCIDENT, THOROUGHLY INSPECT THE MACHINE AND TEST ALL
FUNCTIONS. DO NOT ELEVATE THE PLATFORM UNTIL YOU ARE SURE THAT ALL
DAMAGE HAS BEEN REPAIRED, IF REQUIRED, AND THAT ALL CONTROLS ARE
OPERATING CORRECTLY.
4.1
Incident Notification
EMERGENCY PROCEDURES
SECTION
4
