PowerLift
by ReechCraft
48
Annual Machine Inspection
The Annual Machine Inspection must be performed by a competent person or a
qualified mechanic on an annual basis, no later than 13 months from the date of
the prior Annual Machine Inspection.
Reference the Service and Maintenance Sections of this manual and appropriate
inspection form to complete this inspection.
5-Year Machine Inspection and Track Replacement
T
he Mast Coupling Pins, Cam Locks, Track and Climbing Unit must be inspected
and the track replaced by an authorized ReechCraft Service Center when:
•
The track is worn beyond specification (0.2 in.). (See Figure 6-1)
•
The track is damaged, bent or corroded.
In conjunction with specified inspections, maintenance shall be performed by
a competent person or a qualified mechanic.
The preventive maintenance and inspection checks are listed and defined in
the following table. The table is divided into two parts: “AREA” and “INTERVAL”.
The component or function to be inspected are listed in the AREA column and
the interval at which time they are to be inspected are listed in the INTERVAL
column.
NOTE:
The checks and services listed in this schedule are not intended to take the place
of any local or regional regulations that may pertain to this type of equipment nor should
the list be considered as all inclusive. Variances in interval times may occur due to the
environment the machine is subjected to.
Inspection and Maintenance Codes:
1. Check for proper and secure
installation
2. No gouges, excessive wear or
dents showing
3. Visually inspect for excessive wear,
damage, cracks or distortion
4. Check for cracked or broken welds
5. Check area is clean and free of
debris
6. Check for proper adjustment
7. Check for proper operation
8. Check for proper spring back
9. Check for signs of leakage
10. Check for proper tolerances
11. Check for proper specifications
12. Verify
13. Perform
14. Replace
15. Inspect per Operator’s Safety
Manual
6.3
preventive Maintenance & Inspection Schedule
secti
On
6
SERVICE & MAINTENANCE
