Reece posh Manual Download Page 1

page 1 of 5

BRISTOL TORBEX SHOWER BASE

To see the complete BRISTOL range go to  

www.reece.com.au/bathrooms

Dimensions are nominal measurements only.

SPECIFICATIONS

Recommended Use

Domestic, hotel and commercial

Material

Torbex High Strength Composite

Dimensions

  900mm x 900mm x 29mm
1200mm x 900mm x 29mm
1370mm x 900mm x 31mm
1660mm x  900mm x 31mm

Waste Outlet

Centre Rear

We recommend the use of soapy water or approved cleaners.
This product should not be cleaned with abrasive materials.
Damage caused by any improper treatment is not covered by the product warranty- refer to Warranty Conditions.

CLEANING RECOMMENDATIONS

Disclaimer

: Products in this specification manual must by regulation be installed by 

licensed and registered trade people. The manufacturer/distributor reserves the right to vary 

specifications or delete models from their range without prior notification. Dimensions are 

nominal measurements only. Dimensions and set-outs listed are correct at time of publication 

however the manufacturer/distributor takes no responsibility for printing errors.  

Tech Page Version 1

Summary of Contents for posh






Reviews: