MILLI
To see the complete MILLI range go to
www.reece.com.au/bathrooms
pure progressIve shower/baTh MIxer
CLeanIng reCoMMendaTIons
We recommend the use of soapy water or approved cleaners.
This product should not be cleaned with abrasive materials.
Damage caused by any improper treatment is not covered by the product warranty. Refer to Warranty Conditions.
disclaimer:
Products in this specification manual must by regulation be installed by licensed and registered trade
people. The manufacturer/distributor reserves the right to vary specifications or delete models from their range
without prior notification. Dimensions are nominal measurements only. Dimensions and set-outs listed are correct
at time of publication however the manufacturer/distributor takes no responsibility for printing errors.
Tech page version 1
AS/NZS 3718
LIC. 20081
Dimensions are nominal measurements only.
62
28
speCIFICaTIons
recommended use
Domestic, Hotel and Commercial.
Finish
Chrome, Matt Black, Rose Gold,
Brushed Gunmetal.
pressure rating
Maximum continuous operating pressure 1000kPa.
As per AS/NZS 3500 pressure must be limited to
500kPa on any new home extension or renovation.
For best performance and longer life we recommend
150-500kPa
Hot and cold water inlet pressure should be equal.
Temperature rating
Max continuous working temperature
65 deg. C
suitable hot water
units
Storage Tank: Yes
Continuous Flow: Yes
Gravity Feed: Not recommended
page 1 of 3