METHVEN
AIO AURAJET HANDSET
CLEANING RECOMMENDATIONS
We recommend the use of soapy water or approved cleaners. This
product should not be cleaned with abrasive materials. Damage caused
by improper treatment is not covered by the product warranty – refer to
warranty conditions.
To see the complete AIO range go to
www.reece.com.au/bathrooms
SPECIFICATIONS
Recommended Use
Domestic, hotel and commercial
Colour
Matte Black
Pressure Rating
Suitable for high pressure applications and has
been WELS certified to the following:
Minimum operating pressure 150kPa
Maximum operating pressure 500kPa
Temperature Rating
Maximum continuous working temperature 70°C
(recommended 38°C - 42°C)
Minimum 1°C
Suitable Hot Water
Units
Storage Tank: Yes
Continuous Flow: Yes
Gravity Feed: Not recommended
WELS
Stars: 3
Flow rate: 9L/min
Standards
AS/NZS 3662
Spray Patterns
Aurajet Spray
Disclaimer:
Products in this specification manual must by regulation be installed by
licensed and registered trade people. The manufacturer/distributor reserves the right to
vary specifications or delete models from their range without prior notification. Dimensions
are nominal measurements only. Dimensions and set-outs listed are correct at time of
publication however the manufacturer/distributor takes no responsibility for printing errors.
Tech Page Version 1
1/2" BSP Male
132
74
238
24
WaterMark
AS/NZS 3662
WMKT21090
page 1 of 2
The more
stars the more
water efficient
WATER RATING
www.waterrating.gov.au
9.0
litres per
minute
In accordance with AS/NZS 6400
Licence No. 0095
Methven Australia Pty Ltd
