X2 COMBAT Install Guide 2.0
11
1.0 Installing the camera head
X2 COMBAT is supplied with an industry-
standard 4” PCD base, for mounting directly onto poles,
towers and brackets using a compatible 4” PCD mount
(shown below in Fig. A). The base provides a
secure eyelet for attaching the supplied Safety-Bond.
Ensure the Safety-Bond is securely fitted at all times.
1.1
PTZ configuration
–
converting hanging camera to upright camera mode
X2 COMBAT can be mounted as a hanging dome or upright PTZ configuration. The default configuration
is
Hanging
. To convert the camera to upright PTZ, simply invert the camera onto an upright PCD mount,
then change the
Install Mode
setting in the
PTZ Parameter
page,
in the camera’s web interface (see
separate Web User Guide).
Safety-bond harness point
Fig. A X2 COMBAT PCD Direct-Mounting
base:
Safety-bond in place
Fig. B Correct Mounting orientations
