Red
MAX
™
Base Station
user manual
Doc. #70-00058-01-01-DRAFT
Proprietary Redline Communications © 2006
November
29,
2006
Page 55 of 106
4.4 Interface
Configuration
View and modify the base station settings for the wireless, Ethernet, and management
interfaces.
4.4.1 Wireless
Interface
Click
Wireless Interface
in the menu (left side of screen) to view and modify the base
station MAC, PHY, and RF wireless settings.
Note: Changes to settings marked with a red asterisk
(
*
)
are only effective after clicking the
Save
button and resetting the base station terminal.
Figure 25: Web - Configuration - Wireless Interface Screen
RF Parameters
RF DL Channel KHz
: (
*
) Enter the channel frequency to use for this system. The setting
is validated against the type of radio installed. All subscribers in the sector must use this
frequency setting.
Table 17
:
System - Wireless Channel Selection (3.4 - 3.6)
Channel
Spacing
Lower Sub-Band (MHz)
Upper Sub-Band (MHz)
3.5
MHz f
c.n
= 3401.25 + 3.5*n, n = 1-25
f
c.n
= 3501.25 + 3.5*n, n = 1-50
7.0 MHz
f
c.n
= 3999.50 + 7.0*n, n = 1-12
f
c.n
= 3499.50 + 7.0*n, n = 1-24